With all the wonderful things I  experienced at my Copic Intermediate Certification class, I  do feel compelled  to share a  story with you., and I assure it's a story that I'm laughing about  now.   I'm going to have a little fun with what happened, and let YOU, my  readers give me your opinion on what YOU think happened in this Great Paper  Cutter Caper for a chance to win a free stamp set.   This is my  story, and it's my hope that you will see the humor in it as I do, because that's truly why I'm sharing it.  It's just too good to keep to one's self, and honestly, what ARE the chances?
 A few weeks ago, I was asked to fill  out a designer spotlight form for Peachy Keen Stamps, and one of the questions  on that form was, "You're  asked to get crafty in a room with absolutely no supplies -you can bring five  tools. What do you bring with you?" One of my top  five things that I cannot do without for my crafting is my Making Memories self  sharpening paper cutter.  That was one of my answers on my spotlight form, and  anyone who has had a paper crafting tool discussion with me will also know that  I sing the praises of this piece of equipment!  I LOVE my MM paper cutter, and  this is what it looks like.

So, a paper cutter was on the list of supplies that we should  bring to our Copic class, and mine went with me for that purpose, and also  because I needed to cut card stock and prepare materials for the class I was  teaching on Saturday.  I did indeed cut card stock for that class on Thursday  evening in my hotel room, and my paper cutter was working just beautifully as  always.  I gathered my supplies and placed them all in my "My Creative Time" bag  that was gifted to me by my sweet friend Emma at CHA, and that bag was placed  under the table at my feet for the duration of the Copic class on  Friday.   
Our class started at 9 a.m., and we spent an incredible 3+ hours  learning all the wonderful things that Maryann had to share with us, taking a  break for lunch around 12:30.  Then it was back to class for more instruction  and a chance to actually start coloring and putting some of our new found  knowledge to the test.  
We took our break for dinner around 4 p.m., and I chose to leave  my bag with everything in it just as I had at the lunch break, and I had no  worries whatsoever about doing so.  We came back to begin the make and take  portion of our class, and I will share with you that this project included a  sheet of chipboard that needed to be cut in half.  When I sat down at the table,  I noticed that the person sitting next to me had already begun working on their  project, and their chipboard had been cut.  Honestly I was very surprised at the  condition of it.  It looked like something had gnawed the chipboard in two, and  this person was feverishly sanding on it trying to smooth up that frayed and  gnarled edge.  I didn't think too much about it, but I did feel  bad that the  project obviously wasn't turning out the way they had hoped, and honestly, I was  a little worried that I would be struggling with it as well.  I went on to begin  my project, and got to the point where I was ready to cut my chipboard.  I  picked up my paper cutter, and  I looked at my paper cutter, then looked at the  chip board, and I said out loud, "Oh, I don't think this is a good idea.".  The  chipboard was very obviously to me, too thick for my particular paper cutter,  and it does say on the top of the paper cutter that 2 sheets of card stock is  the max that should be cut at one time.  The person next to me heard what I'd  said, and leaned over toward me  a bit to state "That won't cut it.".  Well, I  had pretty much figured that part out, BUT, I was glad for another opinion to  confirm what I suspected, so I put my paper cutter away, and got out my heavy  duty scissors to cut my chipboard.  I continued to work on my project, and got  to the point where I was ready to cut the card stock that my image was stamped  and colored on, and  of course I got out my  beloved  paper cutter for that. ;-)  Only  one sheet and a piece of cake, right?  When I made the first cut, I commented to  my friend, Kathy that something wasn't right with it.  It was doing more chewing  than cutting, and it really looked like I had distressed the edges  of that card  stock instead of cutting it, but, not thinking too much about it, I decided I  was okay with that look, and went with it.  I knew there was something "not  quite right" with my top five favorite paper crafting tool, but I really didn't  have a clue what would cause that, as I'd never experienced anything like it  before.  With the rush to try and complete as much of my project as possible  before our time was up, I put my paper cutter back in the bag, and moved on.   
I will note that the person sitting next to me became continually  frustrated as time went along, stating that they weren't happy with their  coloring, and a multitude of other complaints about their work, and that person  finally put their make and take project away and worked on something completely  different than what we were given.  I smiled and acknowledged their  obvious disdain for their work, and commented that sometimes that happens to all  of us, and especially when we feel like we're trying to get something finished  in a short amount of time. 
I completed as much of my project as time would allow, and  gathered my things, preparing to make the long trek home, as it's about a 6 hour  drive from Chicago to my home in north central Missouri.  I honestly didn't  think another thing about why my paper cutter was acting so funny until after I  arrived home and laid my head on the pillow somewhere around 4 a.m.  At the  point where I was just about to drift off to sleep, my eyes popped wide open,  and the thought struck me like a bolt of lightning, but I convinced myself that  it was probably my imagination,  that I'd check my paper cutter out in the  morning and it would most likely be working just fine.  I was just too tired to  think about it! 
So morning comes, and despite the fact that I was running on only  about 4 hours sleep, I jump up and ran to the craft room where I had dropped all  of my things when I arrived home earlier that morning.  I grabbed my paper  cutter and plopped down in my comfy chair to try it out, because I just knew  that I had imagined all of this, due to a lack of sleep, and the excitement of  all that had gone on in the past few days.  I pulled a piece of scrap card stock  out, and proceeded to cut away, only to find that my paper cutter was indeed  distressing the paper as opposed to cutting it.  *insert sad face here*  I knew  what needed to be done next and that was to take the entire thing apart to get  to the rotary blade to try and locate what the problem was.  As I took the blade  housing apart, and released the rotary blade from the spring mechanism that  holds it in place, it was very noticiable that there were notches and nicks out  of the blade.  It almost looked like the blade had come out of the track it  follows for sharpening, and actually hit the sharpening guide, causing it to  take chunks out of the blade.    Hmmmm...  Now how did THAT happen??   At this  point, I really thought that I could buy a replacement blade, and it would work  just fine once again, but I did notice that there was a lot of what appeared to  be paper stuck in the track where the blade should be sharpening each time it  cuts a piece of paper.  You know how you get used to the way your equipment  sounds?  Well, each time I ran the cutting blade the length of the track, it  just didn't sound right.  That blade just bumped along, and the sound was  nothing like what I remembered only two days before.
I quickly realized that when I did replace the blade for my  cutter, it wasn't going to track or cut  right if the track was full of paper  particles, so I went ahead and completely cleaned out the track with my X-Acto  knife.  Upon removing all of the debris, which  there was a lot of, I noticed it  was a dull gray in color, the same color as chipboard, BTW.  Once the paper  debris was cleared, I could clearly see that the track was actually bent, and it  was then that I resolved myself to the fact that my paper cutter had cut it's  last sheet of card stock, and that I could kiss it goodbye.  
Well, this is my story.  I will tell you that I an not the least  bit upset about this.  I didn't actually "see" anything happen with my own two  eyes.   I have NO idea what really happened, and I'm not going to make that call. Maybe I watch waaaaaaay too much Investigation Discovery, and this is all  in my imagination?  Who knows??  What I do know is that there is NOTHING wrong  with making mistakes.  I make them all the time, and thank Heaven I do, because  I can honestly say that I learn from them.  Most of the time, I think mistakes  can be considered blessings, just for that reason.  I also know that I have gone  through enough in my life to know that "things" don't matter.  That's why I'm  not upset about this.  While it was an unexpected expense, and an  inconvenience  to have to replace my paper cutter, which has already been replaced, BTW, it's a  thing, and things don't matter at all.  People are what matter, and I have far  too much love and respect for people to  NOT take responsibility for MY mistakes  and at least attempt to make things right, when I've made a mistake.  What do you think?   Please feel  free to leave me a comment and tell me what YOU suspect might have happened, in  the Great Paper Cutter Caper, and you will be entered to  win   the following adorable stamp set from Peachy Keen Stamps.  My dear hubby is anxious to see how creative my crafty friends really are with their scenarios, so I'm going to let him choose the winning entry.  I'll leave this mystery open for comments until Sunday, October 31st , yes... Halloween... at the stroke of midnight.  The winner will be announced on my Monday morning blog post. 
PK-609 Build A Scarecrow    
Thanks for stopping by today, and thank you for humoring me with my story.  I'm looking forward to your thoughts, and I wish you a beautiful day filled with lots of love, a chance to learn from your mistakes, and of course, happy stamping!
Love ya,